You might face an ink cartridge error in cases where there are impurities and dirt on the surface of your ink cartridge contacts. Step 3: Getting the ink cartridge contacts cleaned properly Shut close the outer door that covers the printer front.Д®ven now if you still see that the error persists then continue towards the next instruction below.Close shut the door that covers the ink cartridge access.Now go ahead and follow the steps mentioned above to replace other cartridges also.Finish the ink cartridge installation process easily by visiting 123.hp.com/dj2542

Press down on the ink cartridge in the direction inward to the printer until the ink cartridge correctly clicks into place.

The slot on the right side is for the black ink cartridge.

The slot on the left side is for the tri-color ink cartridge.

Now ensure that the ink cartridge is pushed into the correct slot.

When trying to put back the cartridge into the carriage, hold the cartridge by the sides and with your nozzles facing towards the slot.

Pull out any protective tape that you might find on the nozzles of the printer cartridge.Д¬aution: DonвЂ™t pull out the copper electrical strip.

Touching those parts can lead to clogs, ink failure, or bad connections electrically.

Hold down on the ink cartridges to release them off the carriage, now go ahead and take out the cartridge from the printer.Д¬aution: Make sure that you donвЂ™t touch the copper-colored contacts of the cartridge or the ink nozzles.

Hold on until the carriage becomes silent and still before moving onto the next step.

Pull out the ink cartridge door that triggers the printing carriage to move over to the center of the printer.

Pull open the front external cover door of your printer.

Power OFF the printer by pressing the Power button, if the printer is not turned off.

Detach the ink cartridge from the printer, look out for any plastic tape and remove it and then go ahead to reinstall the ink cartridges and then print it again. If your printerвЂ™s ink cartridges are not fitted into your printer properly then that might be the reason why the ink cartridge error occurs. There was black ink in there still.Step 2: Ensure that the Ink Cartridges are properly installed

I also noticed some wet ink off to the side in my printer where the cartridges hover above once they're done printing something.Cleaned the metal contacts on the cartridges, as well as where they meet on the printer, with rubbing alcohol at the end of a q-tip.This is so that the cartridge can 'breath' and get some air in there (it doesn't even look like there's an opening there, but there is). Unbent a paperclip and poked near the end on the top.for my cartridge it's above the HP symbol.Unplugged from outlet, waited 30 seconds, and plugged back in.However, I also did other things, and these may have helped as well: But I feel like I may not have had it in there quite right to begin with. I took the black ink cartridge out and put it back in. This is what I did to fix it (I think this is the main thing that fixed it): I had the same problem with another printer.

Hp printer 2542 ink cartridges